penang renovations
Calculator

Cabinet Contractor cost calculator

Cabinet Contractor in George Town, Penang typically costs RM 300 to RM 450 per linear foot for a standard job.

Enter your details below for an instant RM range. Figures are sourced from our cabinet contractor cost guide and are an indicative estimate, not a quote.

RM 3,000 to RM 4,500 total

Assumes 10 linear ft, standard finish, George Town pricing.

This is an indicative estimate, not a quote. Your actual price depends on scope, materials, and site conditions.

Rates reviewed 2026-07-10. Source: cost guide.

Get exact quotes from a vetted contractor

Pricing cabinets by the foot? Try the kitchen cabinet calculator.

Cabinet Contractor cost by city

CityTypical range (per linear ft)
Bukit MertajamRM 210 to RM 315
ButterworthRM 255.00 to RM 382.50
Bayan LepasRM 285.00 to RM 427.50
George TownRM 300 to RM 450
Tanjung BungahRM 345.00 to RM 517.50

Ranges shown at the standard tier. Figures for cities other than George Town are adjusted from the George Town baseline.

Cabinet Contractor cost by finish tier

Finish tierTypical range (per linear ft)
BudgetRM 225.00 to RM 337.50
StandardRM 300 to RM 450
PremiumRM 420 to RM 630

George Town pricing. Use the calculator above for figures adjusted to your city.

Rates editorially reviewed by Wei Han, founder of Penang Renovations, against the published cost guide, which was drafted with AI assistance and reviewed for factual accuracy against local contractor rates.

Cabinet Contractor pricing questions

How much does a built-in wardrobe cost in Penang?
A built-in wardrobe in Penang is priced per linear foot, typically RM 180-600+ per foot. A standard 8-foot bedroom wardrobe runs RM 2,500-6,500 depending on carcass material, while a walk-in closet in solid plywood can reach RM 8,000-20,000+.
Should I use particleboard or plywood for a wardrobe in Penang?
Solid plywood is the durable choice for Penang's humidity. It costs 40-70% more than particleboard but resists moisture, holds screws, and lasts 15-25+ years versus 5-10 for particleboard, which swells when damp. For coastal homes or any wall shared with a bathroom or building exterior, particleboard is a false economy.
What drives the price of a built-in wardrobe?
Four choices: carcass material (the biggest lever), door type (hinged is cheapest; sliding, glass, and handleless cost more), hardware grade (Blum or Hettich soft-close hinges cost 3-4x domestic brands), and internal fit-out (drawers, pull-outs, and LED lighting each add cost).
How long does a built-in wardrobe take to make?
Allow 3-7 days from site measurement to quote, 2-4 weeks for workshop fabrication, and 1-2 days for installation. A walk-in closet or full bedroom set runs 4-6 weeks of fabrication, so order early if coordinating with painting or flooring.