How much do window grilles cost in Penang?

Window and door grilles in Penang cost between RM 28 and RM 150 per square foot installed, with a standard window panel of about 4 ft by 3 ft landing around RM 350 to RM 1,200. Mild steel is cheapest at RM 28 to RM 55 per square foot, aluminium runs RM 45 to RM 90, and stainless steel is the premium option at RM 75 to RM 150.

What grille material is best for coastal Penang properties?

For seafront properties in areas like Bayan Lepas, Tanjung Tokong, and Batu Ferringhi, aluminium or stainless steel is best because Penang's salt air corrodes mild steel quickly. Aluminium does not rust and suits high-rise condos, while grade 316 stainless steel resists salt-air pitting and is the right choice for ground-floor and seafront homes where security still matters.

Does mild steel rust on Penang grilles?

Yes, mild steel rusts, and Penang's coastal salt air accelerates it so a bare painted grille can show rust bleed within three to five years. The protection is the coating: insist on a hot-dip galvanised base with epoxy primer and powder coat, budget RM 5 to RM 10 per square foot more for it, and plan to inspect coastal-facing grilles every three to four years.

How long does it take to install grilles in Penang?

Grilles are made to measure, so expect two to four weeks from accepting the quote to installation. Mild steel fabrication takes one to two weeks, aluminium and stainless take two to three weeks, and installation for a whole house is usually one to two days.

Calculator

Door & Window Grille cost calculator

Door & Window Grille in George Town, Penang typically costs RM 45 to RM 90 per square foot for a standard job.

Enter your details below for an instant RM range. Figures are sourced from our door & window grille cost guide and are an indicative estimate, not a quote.

Built-up area (sq ft)Finish tierCity

RM 4,500 to RM 9,000 total

Assumes 100 sq ft, standard finish, George Town pricing.

This is an indicative estimate, not a quote. Your actual price depends on scope, materials, and site conditions.

Rates reviewed 2026-07-07. Source: cost guide.

Get exact quotes from a vetted contractor

Door & Window Grille cost by city

City	Typical range (per sq ft)
Bukit Mertajam	RM 31.50 to RM 63.00
Butterworth	RM 38.25 to RM 76.50
Bayan Lepas	RM 42.75 to RM 85.50
George Town	RM 45 to RM 90
Tanjung Bungah	RM 51.75 to RM 103.50

Ranges shown at the standard tier. Figures for cities other than George Town are adjusted from the George Town baseline.

Door & Window Grille cost by finish tier

Finish tier	Typical range (per sq ft)
Budget	RM 33.75 to RM 67.50
Standard	RM 45 to RM 90
Premium	RM 63.00 to RM 126.00

George Town pricing. Use the calculator above for figures adjusted to your city.

Rates editorially reviewed by Wei Han, founder of Penang Renovations, against the published cost guide, which was drafted with AI assistance and reviewed for factual accuracy against local contractor rates.

Door & Window Grille pricing questions

How much do window grilles cost in Penang?: Window and door grilles in Penang cost between RM 28 and RM 150 per square foot installed, with a standard window panel of about 4 ft by 3 ft landing around RM 350 to RM 1,200. Mild steel is cheapest at RM 28 to RM 55 per square foot, aluminium runs RM 45 to RM 90, and stainless steel is the premium option at RM 75 to RM 150.
What grille material is best for coastal Penang properties?: For seafront properties in areas like Bayan Lepas, Tanjung Tokong, and Batu Ferringhi, aluminium or stainless steel is best because Penang's salt air corrodes mild steel quickly. Aluminium does not rust and suits high-rise condos, while grade 316 stainless steel resists salt-air pitting and is the right choice for ground-floor and seafront homes where security still matters.
Does mild steel rust on Penang grilles?: Yes, mild steel rusts, and Penang's coastal salt air accelerates it so a bare painted grille can show rust bleed within three to five years. The protection is the coating: insist on a hot-dip galvanised base with epoxy primer and powder coat, budget RM 5 to RM 10 per square foot more for it, and plan to inspect coastal-facing grilles every three to four years.
How long does it take to install grilles in Penang?: Grilles are made to measure, so expect two to four weeks from accepting the quote to installation. Mild steel fabrication takes one to two weeks, aluminium and stainless take two to three weeks, and installation for a whole house is usually one to two days.